planesections
  • 1. Builder
    • 1.1. Beam Sections
      • 1.1.1. SectionBasic
        • SectionBasic
      • 1.1.2. SectionRectangle
        • SectionRectangle
    • 1.2. Beam Nodes
      • 1.2.1. 2D Node
        • Node2D
      • 1.2.2. 3D Node
        • Node3D
    • 1.3. Beam
      • 1.3.1. Beam
        • Beam
      • 1.3.2. Fixities
        • Fixity
        • FixityTypes2D
      • 1.3.3. Eulerbeam
        • EulerBeam
      • 1.3.4. Timoshenkobeam
        • TimoshenkoBeam
      • 1.3.5. New Euler Beam
        • newEulerBeam()
      • 1.3.6. New Simply Supported Beam
        • newSimpleEulerBeam()
      • 1.3.7. New Timoshenko Beam
        • newTimoshenkoBeam()
      • 1.3.8. New Simply Supported Timoshenko Beam
        • newSimpleTimoshenkoBeam()
    • 1.4. Beam Loads
      • 1.4.1. Point Load
        • PointLoad
      • 1.4.2. Constant Element Load
        • EleLoadDist
      • 1.4.3. Linear Element Load
        • EleLoadLinear
  • 2. Analysis
    • 2.1. outputRecorder
    • 2.2. OpenSeesAnalyzer2D
    • 2.3. OpenSeesAnalyzer3D
    • 2.4. PyNiteAnalyzer2D
      • PyNiteAnalyzer2D
        • PyNiteAnalyzer2D.analyze()
        • PyNiteAnalyzer2D.buildBeams()
        • PyNiteAnalyzer2D.buildEleLoads()
        • PyNiteAnalyzer2D.buildEulerBeams()
        • PyNiteAnalyzer2D.buildNodes()
        • PyNiteAnalyzer2D.buildPointLoads()
        • PyNiteAnalyzer2D.initModel()
        • PyNiteAnalyzer2D.runAnalysis()
  • 3. Diagram
    • 3.1. Plot Beam Diagram
      • plotBeamDiagram()
    • 3.2. Beam Plotter
      • BeamPlotter2D
        • BeamPlotter2D.normalizeData()
        • BeamPlotter2D.plot()
        • BeamPlotter2D.plotBeam()
        • BeamPlotter2D.plotDistForceLables()
        • BeamPlotter2D.plotEleForces()
        • BeamPlotter2D.plotLabels()
        • BeamPlotter2D.plotPointForceLables()
        • BeamPlotter2D.plotPointForces()
        • BeamPlotter2D.plotSupports()
  • 4. Environment
  • 5. Post-Process
    • 5.1. Get Beam Displacement
      • getDisp()
    • 5.2. Get Beam Vertical Displacement
      • getVertDisp()
    • 5.3. Get Beam Maximum Vertical Displacement
      • getMaxVertDisp()
    • 5.4. Plot Internal Forces
      • plotInternalForce()
    • 5.5. Plot Shear Force
      • plotShear()
    • 5.6. Plot Moment
      • plotMoment()
    • 5.7. Plot Displacement
      • plotDisp()
    • 5.8. Plot Vertical Displacement
      • plotVertDisp()
    • 5.9. Plot Vertical Displacement
      • plotRotation()
planesections
  • 5. Post-Process
  • View page source

5. Post-Process

These classes are used to plot beam outputs.

  1. Get Beam Displacement

  2. Get Beam Vertical Displacement

  3. Get Beam Maximum Vertical Displacement

  4. Plot Internal Forces

  5. Plot Shear Force

  6. Plot Moment

  7. Plot Displacement

  8. Plot Vertical Displacement

  9. Plot Vertical Displacement

Previous Next

© Copyright 2020, CSlotboom.

Built with Sphinx using a theme provided by Read the Docs.